kulmalista - Kuljetuslaatikot, salkut ja räkit Suomesta | Casemakers

Kuljetuslaatikot, salkut ja räkit Suomesta | Casemakers

  • Etusivu
  • Palvelut
  • Yritys
  • Tuotteet
  • Blogi
  • Yhteystiedot
  • enin English
Kauppa
Valikko
  • Etusivu
  • Palvelut
  • Yritys
  • Tuotteet
  • Blogi
  • Yhteystiedot
Kauppa
  • enin English
  • Kauppa
  • Tuotteet avainsanalla “kulmalista”
Tuotekategoriat
  • Kuljetuslaatikot
    • 19" räkkikotelot
    • Alumiinilaatikot
    • Arkkulaatikot
    • Komposiittilaukut
    • Laitekotelot
    • Muovilaukut
      • B&W
      • SKB
    • Salkut
    • Soitinkotelot
  • Tarvikkeet
    • 19" räkkiosat
    • Kulmasuojat
    • Listat
    • Liukukiskot
    • Muut tarvikkeet
    • Nostokahvat
    • Pehmusteet
    • Pyörät
    • Saranat
    • Sulkimet
    • Upotteet

Näytetään kaikki 3 tulosta

kulmalista

  • EG-0126-kulmalista

    Kulmalista 25x25x1,5

    Saatavilla heti
    7,50 € (sis alv 24%)
    Lisää ostoskoriin
  • EG-0100-kulmalista

    Kulmalista 30x30x1,5

    Saatavilla heti
    8,50 € (sis alv 24%)
    Lisää ostoskoriin
  • EG-0112-kulmalista

    Kulmalista 33x33x1,5

    Saatavilla heti
    9,50 € (sis alv 24%)
    Lisää ostoskoriin

Eikö löydy sopivaa pipanaa tai kuljetuslaatikkoa?

Casemakers on suomalainen kuljetuslaatikkotehdas, jonka osaaminen keskittyy mittatilaustuotteiden valmistukseen. Jos etsit jotain tiettyä tuotetta jota ei verkkokaupasta löydy, niin naputtele meille sähköpostia tai ota luuri käteen ja rimpauta. Inspiraatiota ratkaisuihin voi käydä houkuttelemassa myös Casemakersin laatikkomestareiden Instagramista tuosta alhaalta.

casemakers

Julkaisemme Casemakersin Instagramissa Keiteleen tehtaalla valmistettuja kustomoituja kasseja. Hanki sinäkin kunnon kassit!

Casemakers | Laatikkomestarit
New life for old cases or throw them on the gravey New life for old cases or throw them on the graveyard? 🪦We received shockmount rack which slide doors were in really poor condition. Here is walkthru video how case was revived back to life! 🚑

#flightcase was not our build but decided to give a chance. Original slide door rollers were made of plastic which went broken and stuck whole door. New parts which we use is fixed on the wall and there is serial of bearings. It’s easy to use and easy to change. 💪 

@pennelcomonline #flightcases #rackcase #shockmount #repairshop #repairing #roadcase #howitsdone #foryourpageinstagram #ɪɴsᴛᴀɢᴏᴏᴅ #repaired #cncmachining #retrofit #retrofitting #retrofits #casemaker #slidedoor
GrandMA3 light console is the work-horse on the ra GrandMA3 light console is the work-horse on the range. 🐎 It has stylish black surface so it definitely needs #flightcase with black finish!

Black coated flight cases came in picture years ago but it was rare. Now it’s more like weird if there is no any 🌑 black ALU 🌑 builds in production. To keep production run smooth coated parts need own stock. It is like doubling the amount of flight case parts in warehouse. Black parts need also black fittings. When every bits and bobs are black you can actually spot the difference the shades of black. 😎

We use #professional Finnish company 🇫🇮 to powder coat the parts. Thick coating and strict quality control ensure the flight case also long lasting and looks good. It’s no surprising that bright steel and aluminium will appear on the edges of the case in time. Coating wears off partially in years of use but it’s the cost of styling. For that reason the thicker coating —> the better wear resistance. 👊

Hög Live likes their flight cases in black. They really stand out on the field when this group is arriving. This new #grandma3 light flight case for @hog.live  is build with black parts and fittings. Flight case will be later equipped with two monitor mounts. You can guess the colour of the mounts! ♠️♣️♠️♣️

#lightingdesign #lightingsetup #lightingsolutions #lightingtech #lighting #lightingengineer #eventprofs #eventproduction #eventproductions #powdercoating #powdercoated
Rogue R2X is a powerful moving head for profession Rogue R2X is a powerful moving head for professional lighting and rental. Chauvet has made perfect product ❌BUT❌ it’s without factory insert! Damn! Luckily we have tools to build snuggle fit foam inserts for pro light 👍 Closed cell foam is fair good stuff and easy to cut. 

Pro light cases have some limitations. Mostly rentals and professionals demand cases should be in module dimensions. Which are someway 240cm truck width sliced to 60cm partitions. Keeping module dimensions in mind when planning flight cases is important. We agreed! 🆗

60cm wide #flightcases are the most valuable standard while packing truck. Unfortunately some of pro lights are unsuitable for this way of packing but Rogue Wash is just spot on! 👌Case can be designed for two, four or six units. Even six units of R2X packed in one case with accessory section is nearly 120cm long.

Flight case with large hardware and good quality of work is the product how every pro light case is build at Casemakers. CNC carving added on the side give case the final touch! 👌

#fypinstagram #prolight #prolighting #chauvet #lightingtech #lightingsolutions #lightingdesign #prolights #casemaker #casemakers #flightcase #movinghead #movingheads #movingheadlight
Kaikka and Hyrde from @stam1na_official will tell Kaikka and Hyrde from @stam1na_official will tell you few words of their Guitar and Bass Vaults. 🎸🎸 It’s in Finnish but no worries there are subtitles on the video! ✌️

Past time our Guitar Vault concept has been developed with the experience and feedback of the users. The first Casemakers Guitar Vault ever was made for Markus Laakso. Now there is hundreds of vaults all over the world travelling with touring artists including excellent metal band Stam1na. What is interesting to find almost every user has their own preferences for the case.

Currently we are balancing with mandatory preferences of the case and total weight. Few weeks ago one great guitarist from Finntroll said: “Yes it’s sure it’s possible to build it from ultra light space ship steel to achieve the lightest case ever made but it it really necessary. It well cost big bucks!”💰. Smart words! Case should have reliable price also. If you are still ready to purchase 15000EUR Guitar Vault - yes call us we can do it!

Currently flight companies draw the line where #flightcase weight should be set. Current max is 22-23kg for each package. Casemakers light weight Guitar vaults weight 10 to 13 kilos each. As Antti is telling on the video he has two ESP explorer style guitars, straps, cables and few pedals fitted in one case and total weight is exactly 22kg. ✌️

#guitarcase #guitarcases #guitarvault #stam1na #finnishmetal #finnishmetalband #flightcases #madeinfinland #howitworks #touringband #touringbands #bandontour #ontheroadagaintour #sawohouse #casemakers
ASC guitar vault with mods 👌 — Busy week at c ASC guitar vault with mods 👌
—
Busy week at case factory and machines will crunch from dusk to dawn 💪 @anssikela Anssi needed case for his most precious and ASC is the way to go! Wait to see when the case is filled 💎
.
#guitarvault #casemakers #customcase #professional #guitargear #eventmanagement #eventproduction #guitarcase #ascguitarvault #roadcase #madeinfinland #backlinetech #backline #guitarists #guitarcollection
Oh boy time to cut some gold 🏅 — 34mm birch p Oh boy time to cut some gold 🏅
—
34mm birch plywood sliced like bacon ✌️ #scmmorbidelli won’t let us down! Spring has come for sure when truss stackers will appear on CNC table!
.
.
#birchplywood #birchply #cncrouter #cncowners #trussstacker #cncwoodworking #cncmachine #springishere☀️ #casemakers #customshop #cnccarving #plywood #plywoodproject #balticbirch
Everyday is black friday in cassitehdas 😎 — Everyday is black friday in cassitehdas 😎 
—
#casemakers #flightcases #professional #customcase #roadcase #koffert #flightcase #eventproduction #eventmanagement
Client question: can flight case have wings? ✈️
—
Yes! Or almost! This Flying Dutchman has folding tables on the sides. Looks like it’s taking off 🦅 Great AV installation flight case with Ergotron screen mount. It’s easy to expand table area with simple flip tables.
.
.
#casemakers #flightcases #madeinfinland #foldingtable #foldingtables #klaffbord #klaffipöytä #professional #flightcase #avinstallation #roadcase #musiikkitalo #madeinkeitele #fliptable #koffert #audioengineer
This is brand new mobile bar stand! 🥃 Easy setu This is brand new mobile bar stand! 🥃 Easy setup in 3 minutes! Thanks to @olutravintola_konttori for pushing forward this product! 💪 #mobilebar #flightcase #madeinkeitele #custom #drinkbar #flightcases #madeinfinland #mobiledrinkbar #roadcase #flightcasebar #portablebar
Checking all functions work on drum #flightcase! 👊 While ago we made drum vaults and trunk flight cases for Atte from Beast in Black. Case builds with color coded lid edges and cool cymbal trays.

💟 Pink wraps all the hardware of drums and it has extra space for other necessary equipments like the very very important thing: drum carpet! Case bottom was reinforced with thick castor board to ensure flight case will not look as tired Sauna Timo after the final.

💎Blue’s and 🔥 orange’s primary job is to carry drum shells like both bass drums, snares and toms. Another great additions are cymbal trays, accessory box and space for drum heads. The whole set packed up safely in three #flightcases!

These flight cases were forged in middle of Finnish nature at Keitele Finland! 🇫🇮 Great products rolling currently all over the world! 👍

#fypinstagram #roadcase #drums #drumset #drumstagram #drumsdaily #drumsdrumsdrums #drumkit #drumkits #touringband #bandonroad #ontheroadagain #ontheroad #customizations #madeinfinland #casemakers
Starts to feel like summer is coming 🔥 — Grea Starts to feel like summer is coming 🔥
—
Great start of the year everybody! We keep gears running in double shifts to build your new cases 🤘Like Yngwie Malmsteen said: how less can be more, more is more! 
.
.
#flightcases #madeinfinland #casemakers #roadcases #eventproduction #koffert #eventmanagement #shockmount #racks #heavyduty #madeinkeitele #atacase #professionalcase #casefactory #productionmanager #eventprofs #productionrental #rentalsound #rentallighting #transport #professionalaudio
Backline wardrobe with mirror! 🥼🧥 — Better Backline wardrobe with mirror! 🥼🧥
—
Better gigs with the best cases 💯 just throw the ideas and we figure it somehow! @anssikela Anssi and Ville had great vision and here are the results!👌
.
#casemakers #flightcases #backline #roadcases #eventmanagement #eventproduction #eventprofs #backlinetech #customcase #madeinfinland🇫🇮 #flightcasefactory #keitele #casefactory
Case without ramp is like finnish winter start wit Case without ramp is like finnish winter start without massive fender bender✌️Ramps for everyone! #flightcase #ramp #madeinkeitele #customcase #roadcase #flightcases #madeinfinland #welovecases
Allen&Heath dLive C2500 case /w doge home 🐶 — Allen&Heath dLive C2500 case /w doge home 🐶
—
Console fitted doghouse was asked so here it is! Safe touring for console and the dogs 🦴
.
@allenandheath @pennelcomonline #casemakers #flightcase #allenheath #mixingconsole #flightcases #mixingengineer #audioengineer #soundengineer #eventmanagement #eventproduction #eventprofs #roadcase #madeinfinland
Phenomenon of the year before festivals is to put Phenomenon of the year before festivals is to put stuff in order at warehouse. Get rig of mic or speaker stand stacks and get organisers! These will keep stands in order and easily visible. 👀 Stands stay also in better condition without scratching each other.

These are heavy MF’s! 👊 This particular holds 77 mic stands and is accessible in both ends. Speaking about heavy this organiser holds over 20m2 of birch #plywood. Loaded it’s easily more than 100kg. Luckily this goes on pallet rack! Mic stand organisers can be used in vertical or horizontal ways. Locked with cross braces makes it super sturdy.

I have seen these made of plastic pipes which is fair good idea. Pros are faster to build and case weights less. Downsides are this design usually need rear wall to hold it up and case fits less stands. As usual plywood version is kind a indestructible so maybe better safe than sorry. ✌️

Until next time! 
Your case designer, Henri 

#flightcase #micstand #micstands #speakerstand #speakerstands #organiser #organisers #organizers #howitsmade #birchply #birchwood #birch #birchplywood #casefactory #warehousesolutions #eventprof #eventpros #eventprofessionals #casemaker #casemakers
Routing custom foam is easy 👍 — When you have Routing custom foam is easy 👍
—
When you have right tools for it 😉 Our kassi factory has modern CNC routers and knowledge to cut complex foams! Choose flight case or injection molded plastic case with it and solve your transport problems easily ⚡️
.
.
#foamwork #madeinfinland #custommade #casemakers #customworks #injectionmolding #casefactory #cncrouting #cnccutting #cnccut #cncmachining #cncmilling #madeinkeitele #keitele #measuringtools #flightcase #industrialdesign #industrial_design #manufacture #productioncompany #hardcase #hardcasecustom #transportcase #waterproof #waterproofcase #outdoorgear #rugged #militarygear #milspec #koffert
Prepping is the key! 🔑 To keep machines roll ef Prepping is the key! 🔑 To keep machines roll efficiently we make lot of preparation to the coming weeks. Clients usually say “yo that was quick” when cases are built but the most is done before chips are flying. Let us tell what is going on. 🧐

Thanks to automation and smart programming we have thing called sheet nesting and ERP (Enterprise Resource Planning). Case designer will approve new cases to production line where case parts are exploded and set to nesting module. This module is weeks ahead of case assembly and makes sure parts are available. Combined with smart ERP makes prepping easy. 😎

This is how we build over 1000 cases per year with small group. Effective planning and production = better and durable #flightcases ! 📦

#productionline #factorylife #flightcase #casemaker #roadcases #fypinstagram #cncwoodworking #keitele #madeinfinland
Designing double bass drumset isn’t the easiest Designing double bass drumset isn’t the easiest one but have to say it’s definitely the coolest one which we have made #flightcases 🥁

At this time Atte Palokangas had whole Tama Starclassic set with bunch of racking, cymbals and very important accessories to success on the stage. 🔥This guy had great ideas how to pack stuff and we decided to split all in three cases:

1️⃣st: double bass, snares and cymbals 
2️⃣nd: tom set and small accessories
3️⃣rd: mostly all metal and hardware

That’s it! 👌Cases are in reasonable size and user friendly. Cymbal trays are damn cool and easy to use. Color coded #flightcase lids are the icing on the cake. These will soon run with 🤘@bib_band🤘 on Dark Connection Tour and more after!
Last ride of the year 🎉 — Time to clean the m Last ride of the year 🎉
—
Time to clean the machines and tools! Our cassifactory is on maintenance break until next year. Super big thanks to all loyal clients and customers! See you on 2022 🥳
.
.
#casemakers #finnishquality #flightcases #carrycase #articbluegin #gintonictime #gintonic #flightcase #roadcase #koffert #finnishgin #ginglass #ginglasses #lastrideoftheyear #endof2021 #ginandtonictime #madeinkeitele #madeinfinland #cncwoodworking #thebestpresent #highqualityproducts #finnishdesign #finnishgin #spiritstasting #craftgin #craftcase
Double racks with slide doors ⚡️ — Black pow Double racks with slide doors ⚡️
—
Black powder coat looks damn good - and dark! Even we have new lights in warehouse 💡💡💡 Will need probably headlamp to use 😄
.
.
@hog.live #powdercoating #casemakers #powdercoated #flightcase #powdercoat #aluminiumprofile #professional #audiorack #audioengineering #audioengineers #doublerack #flightcases #eventprofs #rentalsound #professionalaudio #eventproduction #roadcases #madeinfinland #keitele #casefactory #madeinkeitele #liveproduction #soundengineers
Gotsta get cased! ⚡️ This full automatic brewi Gotsta get cased! ⚡️ This full automatic brewing system is now portable one 🍺 with neat logo carving! #casemakers #brewingsystem #flightcase #customcase #madeinfinland #homebrewery #flightcases #madeinkeitele #professional #brewerysystem #cnccarving #cncrouter #scmmorbidelli  #cncmachining #brewieplus #cncvideo
Lifting heavy mörssäri in DB Schenker’s truck Lifting heavy mörssäri in DB Schenker’s truck 💪 Matti at the end tells it all, fits like a glove 🤌 @dbschenkerfi #custom #flightcase #enclosures #madeinkeitele #professional #flightcases #madeinfinland #forklift #mörssäri #dbschenker
Pyynikin Brewing Company -logo you may find at bee Pyynikin Brewing Company -logo you may find at beer festivals in Finland 🇫🇮
—
Get your brand seen with plywood signs! Finding back to your favourite craft beer stand is much easier when there is something to remember 😄 
.
.
@pyynikin #plywoodart #plywooddesign #plywoodsign #cncwoodworking #cncwood #cncwoodworks #customsign #customsigns #cncplywood #cncmilling #cncowner #cnccutting #companysign #pyynikin #pyynikinkäsityöläispanimo #pyynikinbrewingcompany #craftbeercompany #beercompany #finnishcraftbeer #casemakers #customworks #madeinfinland #madeinfinland🇫🇮 #finnishsummer #craftbeerfest #craftbeerfestival
Another mighty magic organizer! 🗄 #customcase # Another mighty magic organizer! 🗄 #customcase #drawercase #merchandiseshop #merchandise #flightcase #madeinkeitele #madeinfinland #casemakers #casefactory #drawerorganizer #mobiledrawer #flightcases #eventproduction #backline
Need more wings?? 🦅 — As we found this model Need more wings?? 🦅
—
As we found this model was pretty good we made few more with more customizations! More is more 🔥This time case was equipped with Chamsys Stadium Connect and mini ITX PC 🎉 @mikkodoingthings @blindchannelcrew
.
@chamsysltd #chamsys #chamsysmagicq #chamsyspcwing #chamsysstadium #lightingcontrol #lighttech #lightingtechnician #casemakers #professional #flightcases #eventmanagement #eventproduction #madeinkeitele #stagelighting #lightingconsole #lightingsetup #lightingtech #lightingengineer #roadcase #flightcase #onpcwing
Wings of darkness 🖤
—
Nothing to add here 😁 It’s great! This time with @philips screens and super light chassis 🤘Get yours now!
.
.
#casemakers #flightcases #madeinkeitele #wingcase #roadcase #audioengineer #monitorengineer #soundengineer #eventproduction #eventmanagement #onpcwing #koffert #professional #casemaker #lighttech #lightingsetup #lightingtechnician
Kiirassoitin as know also @kiiras_instruments is c Kiirassoitin as know also @kiiras_instruments is custom guitar workshop based in Jyväskylä Finland 🇫🇮. Simo Iiskola is behind these amazing instruments and started to build first guitar in 2012. Kiiras Instruments has build guitars e.g. for Eric Meyer (Dark Angel) and Greger Andersson (PAIN). We have made many many many cases for Simo. 👍

Guitar cases can be built in many ways. Low cost option is regular plastic molded case like Gator case or SKB. It’s good as long there is no flights or packing in truck in sight 🚛. Plastic cases carry guitar just alright but there is risk to get wrecked. If you are touring artist then guitar flight case is for you!

Guitar flight case is braced for every direction with aluminium angles and steel corners. It can hold almost 30 times of it’s own weight! 👊 Plywood version can face Leopard tanks - as one of our clients said - and polypropylene is the best option when seeking lightweight solution but still tough as Finnish Timo in Sauna. 🔥

It’s been great to co-operate with Simo because we both trust in CAD. Custom guitar needs custom foam and with Simo’s drawing skills and our CNC workcenter it’s piece of cake. 👌 Go check @kiirassoitin IG and give some comment!

#guitarcase #guitarcases #kiirasinstruments #flightcase #fypinstagram #guitarsofinstagram #customguitar #customguitarbuild #getcustom #getcustomized #customized #customizedcase #cncrouting
Ladies and gentlemen here is Dick Butt! 🍑 Origi Ladies and gentlemen here is Dick Butt! 🍑 Original meme describes the weirdest thing you can think of. This is the most common thing you should remember when talking about your new #flightcases. Dick butt - easy to remember! 🆗

“I need flight case and found out you build those but really don’t know which kind it should be. Also I don’t know what I’m going to put in it.”

Well, there is one hell of a situation. 🔥Speaking about customisation it can be everything and it can be made almost for everything. You can have even #dickbutt carved on it! 👌You have all the possibilities to get the weirdest thing on your flight case if you want. If it’s hard to see what the final product should be then you can lean on us. Here’s our dick butt rule of thumb:

1️⃣ Describe your problem to us, we will help you!
2️⃣ You don’t need to have super designer skills.
3️⃣ Draw raw illustration on paper or link of case built already.
4️⃣ We will suggest solution for you.

Designing service is included in case purchase. This Dick Butt beer mat is also designed, approved by customer and CNC-machined when it’s good to go. Nobody want’s bad Dick Butt or flight case. 🆗

#dickbutt #cncmachine #cncmachining #cncmachined #cncmachines #cncmachiningparts #fypinstagram #carvingwood #logomaker #howitsdone #casemaker #fypinstagram
Dark case does what dark case is 🖤 — Just bei Dark case does what dark case is 🖤
—
Just being dark 😄 if you have thoughts how to lost your case in pitch dark venue, maybe get somebody to stumble on it or just have flight case with cool look then you know what to do. Get the case!🤘
.
.
#casemakers #custom #flightcase #powdercoated #flightcases #eventprofs #customized #roadcase #professionallook #madeinfinland #koffert #powdercoating #eventtech #eventproduction
Flyracks are the best case scenario for your flyin Flyracks are the best case scenario for your flying stuff! ✈️
—
Well that’s our opinion 😄 While ago Marko asked if we could pack Allen & Heath SQ5 and some rack units in one case. Will do 👍 Imagine how safe it feels to be covered by flight case chassis and jump in foam covered IP67 injection molded case. Triple layer protection against angry bag handlers 🤘be like Marko - get flyracks now! 
.
.
#casemakers #flyrack #professional #allenheathsq5 #mixingconsole #flightcase #flightrack #audioengineer #proaudio #flightcases #casemaker #roadcase #madeinfinland🇫🇮 #allenheath #airtravel #airtraveling #injectionmold #injectionmolding #eventprofessionals #eventproduction #eventmanagement #madeinkeitele #soundengineers #koffert #eventprofs #liveproduction
Kuljetuslaatikot, salkut ja räkit Suomesta | Casemakers
  • facebook
  • instagram
  • linkedin
  • youtube

Casemakers Oy

Tuotanto/käyntiosoite:
Hamulanniementie 95, 72630 Keitele

Laskutusosoite:
Tapulinkatu 18, 33400 Tampere
laskutus@casemakers.fi

Y-tunnus:
2652863-9

Myynti & valmistus

Henri Hänninen
040 7767 493
myynti@casemakers.fi

Laskutus & hallinto

Matti Nuutinen
040 8431 653
laskutus@casemakers.fi

  • Tietosuojaseloste
  • Toimitusehdot
  • Oma tili
© 2023 Casemakers Oy - Pidätämme oikeudet muutoksiin.
Sivuston toteutus: rikujokinen.com

Käytämme evästeitä (cookies) parantaaksemme sivustomme käyttökokemusta.

Paina "Hyväksy", jos hyväksyt evästeiden käytön. Tietosuojaseloste

0
Ostoskori
Ostoskorisi on tyhjäVerkkokauppaan
Jatka ostoksia
Calculate Shipping
Kuljetuslaatikot, salkut ja räkit Suomesta | Casemakers
Powered by  GDPR Cookie Compliance
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.

Strictly Necessary Cookies

Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.

If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.